background image

1

Start
time

Bake

time

Timer

On/Off

Clock

Bake

Broil

Clear

/Off

Controls

Clean

Self-Cleaning Oven

Oven

Preheat

Door Locked

ELECTRONIC OVEN CONTROL

Control Pad Functions

Read the instructions carefully before using the oven. 

For satisfactory use of your oven, become familiar with the

various functions of the oven as described below. 

Note

: The graphics on your timer may not look exactly like those shown.

This doesn't change the way it operates.

Note:

 The oven function will not work if the time of day clock is not set.

318200184 (0612) Rev. B

The oven can be programmed to:

Bake normally, Time Bake, Delayed Bake, Broil, Self-Clean

Note: 

Push buttons or pads may be shaped differently.

For a silent control panel:

When choosing a function, a beep will be heard each time a pad is pushed.  If desired, the controls can be programmed for silent
operation.  Push and hold 

START TIME 

pad. After 7 seconds, the control will beep once.  This will block the controls from

sounding when a pad is pushed.  To return the sound, push and hold 

START TIME 

pad again for 7 seconds until 1 beep is heard.

Note:

 The control will return to the audible mode after a power outage.

Temperature Conversion

 (Fahrenheit / Celsius)

The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed
for any temperature from 170°F to 550°F (65°C to 287°C).

To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):

1. Push 

BROIL

 pad.

 

"- - - " appears in the display.

2. Push and hold the 

UP ARROW

 pad until "HI" appears in the display.

3. Push and hold 

BROIL

 pad until °F or °C appears in the display.

4. Push 

UP 

or 

DOWN ARROW 

pad to change °F to °C or °C to °F.

5. Push any function pad to return to normal operating mode.

Bake Pad

- Used to

enter the normal
baking mode
temperature.

Broil Pad

- Used to

select the variable
broil function.

Clean Pad

- Used to

select the self-
cleaning cycle.

Clear Pad

- Used to clear any function previously

entered except the time of day and minute timer.
Push 

Clear pad

 to stop cooking.

Up and Down arrow pads

- Used along with the

function pads to select oven temperature, cooking
time, start time (when programming an automatic bake
time), time of day, clean time and minute timer.

Clock Pad

-

Used to set the
time of day.

Feature indicator
lights

- These light

to show which
feature is in use.

Bake Time Pad

-

Used to enter the
length of the baking
time.

Start Time Pad

-

Used to set the
desired start time
for baking. Can be
used with 

BAKE

TIME

 to program a

delayed bake cycle.

Timer Pad

- Used

to set or cancel the
minute timer. The
minute timer does
not start or stop
cooking.

Oven, Preheat & Lock lights

- The "oven" light will glow each time the oven

unit turns on maintain the set oven temperature. The "Preheat" light will
glow when the oven is first set to operate, or if the desired temperature is
reset higher than the actual oven temperature. The "Door Locked" light will
flash until the door locks when the self-clean cycle is in use. It glows
constantly after the door locks.

Printed in United States

Summary of Contents for FEB24S5AQ - E Walloven 24"S/CLN VariBroil

















Reviews: