background image

22. To protect against the risk of electric shock, fire, and injury, do not immerse the Unit, Plug or electrical 

cord, into water or other liquids. Never use any wet stuffs for cleaning the electrical components. 

 

SAVE THESE INSTRUCTIONS CAREFULLY 

HOUSEHOLD USE ONLY 

 

KNOW YOUR ESPRESSO MAKER 

ON/OFF button

Ready indicator

Pump control button

Power indicator

Cup warming plate

Tank cover

Steam control knob

Detachable water tank

Steam wand

Measuring spoon

Drip tray

Coffee/steam button

Press bar

Funnel

Removable cup shelf

 

BEFORE THE FIRST USE 

To ensure the first cup of coffee tastes excellent, you should rinse the coffee maker with warm water as 

follows:

 

1.  Remove  the  detachable  water  tank  then  pour  water  into  water  tank,  the  water  level  should  not 

exceed the “MAX” mark in the tank. Then replace the water tank cover. 

Note

:  the  appliance  is  supplied  with  a  detachable  tank  for  easy  cleaning;  you  should  fill  the  tank  with 

water first, and then put the tank into the appliance.   

2.  Set steel mesh into metal funnel (no coffee in steel mesh), make sure the tube on the funnel aligns 

with groove in the appliance, t

hen insert the funnel into the appliance from the “Insert” position, and 

you  can  fix  them  into  coffee  maker  firmly  by  turnning  it  anticlockwise  until  it  is  at  the 

lock

  position 

(See Fig.1). 

3.  Place an espresso cup (your cup) on removable cup shelf. Make sure the steam control knob is on 

the minimum position. 

Note:

 the appliance is not equipped with jug; please use your own jug or coffee cup.   

4.  Connect  to  power  source,  press  down  the  ON/OFF  button  to  the  lower  position  which  is  the 

” 

position. The power indicator (red) will be illuminated. 

5.  Press down the pump control button to the lower position which is the 

” position, the pump will 

pump  water,  when  there  is  water  flowing  out,  close  the  pump  by  pressing  the  pump  control  button 

again to the “

STO P

” position, make sure the coffee/steam button is on the higher position which is the 

  position and wait for a moment, the appliance begins to be pre-heated until the ready indicator 

Summary of Contents for FD7189










Reviews: