5
Auto-Off
as a safety feature, the auto-off function will turn off the heat to
the soleplate if the iron is not moved within a certain amount of
time. if the iron is placed on the soleplate or either side without
movement, then the heat will turn off after 30 seconds. if the
iron is placed on the heel rest without movement, then the heat
will turn off after 15 minutes. the power indicator will flash to
indicate that the iron has entered into the auto-off mode and that
no heat is being supplied to the soleplate. to resume use of the
iron after it has entered into the auto-off mode, initiate movement
of the iron. depending on how long the iron has been in the auto-
off mode, you may need to allow it to heat back up. the Ready
indicator will illuminate when the iron has heated back up to the
previously set fabric selection. if the iron is left in the auto-off
mode, it will shut off completely after 5 minutes of entering the
auto-off mode.
Non-Drip System
the iron is capable of generating steam, even at reduced
temperatures, without water drips, sputters, or leaks coming
through the soleplate steam holes.
vertical Steam
the iron is capable of being used as a garment steamer using the
steam burst/Vertical steam button.
Anti-Calcium System
the iron contains an anti-calcium system that reduces calcium
accumulation on the soleplate by removing calcium from the water
inside the reservoir.
WARNING
The Auto-Off function is designed as a safety feature
and should not be used as the primary method of
turning off the iron. The “Using Your Iron” section
contains information on properly turning off the iron.
