10
TROUBLESHOOTING GUIDE
“Ice Full” and “Add Water”
indicators light up
simultaneously.
The “Ice Full” indicator
light is on.
The ice basket is full.
Remove ice from the ice
storage basket to make
more.
Electrical Power Surge
or There may be air in
the lines or the lines are
blocked. The water tank
cannot detect water level.
Turn off the ice maker, pull
out the electric plug, fill it
with water if needed,
replace the plug and then
restart the unit. or
Inspect relative parts;
remove the drain cap on
the back of the unit and
drain out a small amount
of water. Replace the
drain cap and attempt to
use the unit again.
or check if ice is blocking
the ice pusher. Turn off the
unit; let the ice melt and
restart.
PROBLEM
POSSIBLE CAUSES
SOLUTION
“ADD WATER”
indicator light turns on.
Low water level or lack
of water.
Add water and the
ice maker will operate
automatically.
Check that the plug is
plugged into the electrical
outlet.
Disconnection of plug.
There is no indication
on the control panel.
Summary of Contents for EFIC103-AMZ-SC
Page 2: ...2 INTRODUCTION ...
Page 14: ......
