5
Note: If the ambient temperature (the temperature in the area around the fireplace) is greater than the
set temperature, the HI/LOW display, fan, and Bulb will not operate.
1)
By pusing the
0
C/
0
F/Down button, you can switch the temperature format from Fahrenheit to
Celsius and vice versa.
2)
By pressing the TIME button, the LED display will switch from the “temperature” status to the
“time” status. The default time will display “--“. This means that the TIME is not activated and,
therefore, the fireplace will remain on. You must press the HI/LOW/UP button or the
0
C/
0
F/DOWN
once again within (5) seconds to set the time. Each time you press the HI/LOW/UP button, the
time will increase by 0.5 Hr. If you press the
0
C/
0
F/DOWN button, the time will decrease by 0.5
Hr. The maximum value for time is 8.0 Hr. By holding down the HI/LOW/UP button or
0
C/
0
F/DOWN for (2) seconds, the number rotation will cycle more quickly. If you do not press the
HI/LOW/UP button or
0
C/
0
F/DOWN within (5) seconds, the time status will switch back to the
temperature status.
Press TIME to switch
to time status, then
press HI/LOW/UP
button once within 5
seconds to scroll up
5 seconds later the
value switches to
ambient temperature
Press the
0
C/
0
F/Down to
switch from Fahrenheit
to Celsius.
