3
Note:
The time of day
must
first be set in order to operate the oven.
To set the Clock
When the range is first plugged in, or when the power supply to the appliance has been interrupted, the display will flash "12:00".
1.
Press the
CLOCK
or
pad once (do not hold pad down).
2.
Within 5 seconds, push and hold the
UP
or
DOWN ARROW
pad until the correct time of day appears in the display.
3.
Press the
CLOCK
or
pad to accept the new time of day. If the
CLOCK
or
pad is not pressed, the timer will return
automatically to the new time of day after 7 seconds.
Note
: The clock cannot be changed during any bake, timed bake, delayed time bake, clean cycle or delayed clean cycle.
Changing between 12 or 24 Hour Time of Day Display
1.
Press and hold the
CLOCK
or
pad for 7 seconds. After 7 seconds,
"12Hr"
or
"24Hr"
will appear in the display and the
control will beep once.
2.
Press the
UP
or
DOWN ARROW
pad to switch between the 12 and 24 hour time of day display. The display will show either
"12Hr"
or
"24Hr"
.
3.
Wait 5 seconds or press the
CLEAR/OFF
or
STOP
pad to return to the time of day display.
4.
Reset the correct time as described in
To set the Clock
above. Please note that if the 24 hour time of day mode was chosen,
the clock will now display time from 0:00 through 23:59 hours.
To Set the Minute Timer
1.
Press the
TIMER ON/OFF
pad.
2.
Press the
UP ARROW
pad to increase or
DOWN ARROW
pad to decrease the time in one minute increments. The timer can
be set for any amount of time from 1 minute to 11 hours and 59 minutes.
3.
The display shows the timer count down in minutes if more than 1 hour remains. When less than 1 hour remains, the display
will count down in seconds.
4.
When the set time has run out, the timer will beep 3 times. It will continue to beep 3 times every 8 seconds until the
TIMER
ON/OFF
pad is pressed.
Note:
The indicator light located above the
TIMER ON/OFF
pad will glow while the minute timer is active.
Note:
The minute timer does not start or stop cooking. It serves as an extra timer in the kitchen that will beep when the set time
has run out. The minute timer can be used alone or during any of the other oven functions. When the minute timer is in use with
any other mode, the minute timer will be shown in the display. To view other functions, press the function pad for that mode.
To Cancel the Minute Timer before the set time has run out:
Press the
TIMER ON/OFF
pad.
Setting the Clock and Minute Timer
To Set Add 1 Minute Feature
The
ADD 1 MINUTE pad is used to set the Add 1 Minute feature. When the
pad is pressed, 1 minute is added to the
Minute Timer feature if this feature is already active. If the Minute Timer feature is not active and the
pad is pressed, the
Minute Timer feature will become active and will begin counting down from 1 minute. For further information on how to set the
Minute Timer feature see To Set the Minute Timer instructions above.
