12
OPERATING INSTRUCTIONS
Drying Rack (on select models)
Use the drying rack for items which should not be tumble
dried. Insert the rack into the dryer drum, resting the back
support on the moisture sensor bars and the front legs on
the air grill.
Place items to be dried on top of the rack, leaving space
between items and not allowing them to hang over the
sides or through the holes. The weight should not exceed
10 lbs (4.5 kg). Select the air dry (no heat) setting for
items containing plastic, foam rubber, rubber-like materials,
feathers or down.
When items are dry, remove the rack and store it in a con-
venient location.
Other Features
Í
NOTE
For step-by-step instructions on DOOR REVERSAL, refer to
the
Installation Instructions supplied with this dryer.
Í
NOTE
If your model did not come supplied from the factory
with a drying rack you may order one.
Control Lock
To avoid having someone accidentally start or stop the dryer,
press options and select at the same time and hold for
10 seconds. If you attempt to activate the dryer while it is
locked, the display will fl ash and error beeps will sound. To
remove the control lock, press options and select again.
Estimated Time Remaining
The initial drying time will be displayed for about 5 minutes
after the start of a cycle. Then in auto dry cycles, the out-
side of the display will light up in a circular track to indicate
the estimated drying time is automatically being calculated
by the sensors. Timed dry cycles continue with actual time
remaining.
Status Lights
The following indicators may be lighted during the cycle:
• clean lint fi lter
• drying
• cool down
• wrinkle release
• done
Drum Light
The drum light will come on whenever the door is opened
to illuminate the drum during loading and unloading. Clos-
ing the door turns off the light.
Reversible Door
Your dryer is equipped with a reversible door. The door can
be hinged on the right or left side.
moisture sens-
ing bars
rear
support
front
legs
Press and hold both for ten seconds
to lock or unlock the controls.
