THE CONTROLS & OPERATION
7
INSTALLATION METHOD
The product can be used directly after
unpacked (without installation).
USAGE OF CONTROL PANEL
1.
Where power comes initially, all the
LED lights will light for 2s and beep.
Then, the machine will enter into
standby mode and all buttons will be
invalid except “ON/OFF” button.
a) Press “ON/OFF” button
under standby mode and the
machine will beep and enter
into working mode.
b) Press
“ON/OFF”
button under
working mode, for the unit to go into
standby mode with a long beep (If you
turn off the machine under heater
mode, the fan will be off 10s later).
Press
“ON/OFF”
button under working
mode, the unit will be off and enter
into standby mode with a beep.
2.
Press “
FAN
” button to
set wind speed, the unit will
beep: related indicator lights
will turn on for low--medium
—
high.
3.
Press “
TIMER
”
button to
set a 1H, 2H, 4H and 8H lapse
for the unit to turn off after
the selected time has passed.
4.
a) Press “
Horizontal
Oscillation
” button,
for the
blades to move horizontally.
b)
Press “
Vertical
Oscillation”
button, for the blades to move
horizontally.
5.
Press Horizontal and Vertical
oscillation buttons at the same time
for 3s, to enter silent mode; (the
buttons won’t beep when pressed),
press again for 3s, to deactivate silent
mode.
6.
Press “
COOLING
”
button to turn on or off the
refrigeration (pump)
function.
7.
Press “
HEATING
”
switching button:
a) Press this button. to
change from cooling to
heating function under working mode.
Heating mode can only be used with
medium fan speed, temperature will
start at low (71°F) and the first light
indicator will turn on; press this button
twice, to set to medium (84°F) and
the second light indicator will turn on;
press this button three times, to set to
high (96°F) and the third light
indicator will turn on; press this button
four times, heater will stop and after
10s, cooling mode will start (no cool
wind indicator light). Use this to select
desired setting.
b) When in heating mode, if the indoor
temperature reaches (71°F, 84°F or
96°F), the unit will stop heating and
the fan will keep working, when the
indoor temperature is lower than
(71°F, 84°F or 96°F), the unit will
restart. (E.g., The preset temperature
is 84°F, when the indoor temperature
is higher than 84°F, heating function
will stop; when the indoor
temperature is lower than 80°F,
heating will restart.)
Notes:
1.
Cooling and heating function can be
on at the same time and will produce
humid, hot air.
2.
If there is no activity on the control
panel while in working mode for 1min
the indicator lights will dim
automatically and will return to regular
brightness once you press any button
on the control panel again.
3.
In case of power loss,
the unit’s
memory function will restart the unit
with the previous setting once energy
it’s recovered
.