GAS COOKTOP INSTALLATION INSTRUCTIONS
4
CUTOUT DIMENSIONS (INCHES (CM))
OVEN
SIZE
E. hEIghT
F. WIDTh
g. DEpTh
min.
max.
min.
max.
min.
30" (76.2) 27 ¼" (69,2 cm) 28¼" (71.8) 28½" (72.4) 29" (73.7)
23½" (59.7)
27" (68.6) 27 ¼" (69,2 cm) 28¼" (71.8) 24
7
/
8
" (63.2) 25¼" (64.1)
23½" (59.7)
* If no cooktop is
installed directly
over the oven
unit, 5” (12.7cm)
maximum is
allowed.
Typical Under Counter Installation of an Electric Built-in Oven
with a Cooktop Mounted Above
Cut an opening in wood base
minimum 4” (10.2 cm) x 4” (10.2 cm)
to route armored cable to junction box.
4 1/2” (11.4 cm)
Max.*
208/240 Volt
grounded junction
box for built-in
oven.
All mounting
hardware must be used to
secure the built-in oven to
the cabinets. Refer to the
built-in oven installation
instructions.
Side filler panels are necessary
to isolate the unit from adjoining
cabinets. Panel height should
allow for installation of approved
cooktop models. See “Typical
Gas Cooktop Installation Over
an Electric Built-in Oven Installed
Under the Counter” on next page.
36”
(91.4 cm) Min.
Junction box
must be located
approx. 3" to the
left of the built-in
oven cutout.
This cooktop may be
installed over certain
built-in electric oven
models.
Figure 3
Use 3/4” (1.9 cm)
plywood, installed on
two runners, flush
with toe plate. Base
must be capable
of supporting 150
pounds (68 kg) for
27" models and 200
pounds (90 kg) for
30" models.
Unit will
overlap
cutout
(minimum)
edges by 1"
(2.5cm)