9
setting oven controls
setting minute timer
The
timer on.oFF
pad controls the Minute Timer feature.
The Minute Timer serves as an extra timer in the kitchen
that will beep when the set time has run out. It does not
start or stop cooking. The Minute Timer feature can be
used during any of the other oven control functions. Refer
to “Minimum and Maximum Control Pad Settings” for time
amount settings.
to set the minute timer
(example for 5 minutes)
1. Press
timer on.oFF.
2. Press the
uP arroW
pad to increase or
doWn
arroW
pad to decrease the time in one minute
increments. The timer can be set for any amount of
time from 1 minute to 11 hours and 59 minutes.
3. The display shows the timer count down in minutes
if more than 1 hour remains. When less than 1 hour
remains, the display will count down in seconds.
4. When the set time has run out, the timer will beep 3
times. It will continue to beep 3 times every 8 seconds
until the
TIMER ON/OFF
pad is pressed.
to cancel the minute timer before the set time has
run out
1. Press
timer on.oFF
. The display will return to the time
of day.
setting silent control oPeration
The
start time
and
arroW
pads control the Silent
Control operation feature. The Silent Control operation
feature allows the oven control to be operated without
sounds or beeps whenever necessary. If desired the control
can be programmed for silent operation and later returned
to operating with all the normal sounds and beeps.
to change control from normal sound operation to
silent control operation
1. To tell if your range is set for normal or silent operation
press and hold
start time
pad for 7 seconds. “
- -
”
or “
sP
” will appear in the display.
2. Within 5 seconds, press the
uP
or
doWn arroW
pad to switch between normal sound operation and
silent operation mode. The display will show either “
- -
”
or “
sP
”. Wait 5 seconds to return to normal operating
mode.
note
If “
sP
” appears, the control will operate with normal
sounds and beeps. If “
- -
” appears, the control is in the
silent operation mode.
The control will always beep at the end of a minute timer
and will beep when a set temperature has been reached,
even if the control is set to silent operation.
