Frigidaire 318200138 (0610), Instruction Manual

Page: 2 / 20

2
Setting the Clock
INSTRUCTIONS PRESS DISPLAY
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
UPPER
ROAST
LOCKED
WARM
BAKE
DELAY
CONV
BROIL
TIMED
UPPER
TIMER
REMOVE
LOWER
DOOR
RACKS
CLEAN
CONV
BROIL
TIMED
WARM
BAKE
DELAY
LOWER
ROAST
LOCKED
UPPER
ROAST
LOCKED
WARM
BAKE
DELAY
CONV
BROIL
TIMED
UPPER
TIMER
REMOVE
LOWER
DOOR
RACKS
CLEAN
CONV
BROIL
TIMED
WARM
BAKE
DELAY
LOWER
ROAST
LOCKED
UPPER
ROAST
LOCKED
WARM
BAKE
DELAY
CONV
BROIL
TIMED
UPPER
TIMER
REMOVE
LOWER
DOOR
RACKS
CLEAN
CONV
BROIL
TIMED
WARM
BAKE
DELAY
LOWER
ROAST
LOCKED
UPPER
ROAST
LOCKED
WARM
BAKE
DELAY
CONV
BROIL
TIMED
UPPER
TIMER
REMOVE
LOWER
DOOR
RACKS
CLEAN
CONV
BROIL
TIMED
WARM
BAKE
DELAY
LOWER
ROAST
LOCKED
UPPER
ROAST
LOCKED
WARM
BAKE
DELAY
CONV
BROIL
TIMED
UPPER
TIMER
REMOVE
LOWER
DOOR
RACKS
CLEAN
CONV
BROIL
TIMED
WARM
BAKE
DELAY
LOWER
ROAST
LOCKED
UPPER WARM
The Clock pad is used to set the clock. The clock may be set for 12 or 24 hour time of
day operation. The clock has been preset at the factory for the 12 hour operation.
When the wall oven is first plugged in, or when the power supply to the appliance has
been interrupted, the timer in the display will flash along with
"PF" (power failure, See
Fig. 1).
When PF appears in the display and 12:00 is flashing, press
Clear
/Off
.
A beep will sound
and PF will disappear.
To set the clock (example below for 1:30)
1. Press
Clock
. "CLO" and the current time of day will
appear in the display (Fig. 2).
2. Press
1
3 0 pads to set the time of day to 1:30
(Fig. 3). Press
START
. The time of day will appear in
the display (Fig. 4).
Changing between 12 or 24 hour time of day
display
1. Press and hold Clock for 6 seconds. "CLO" and the
current time of day will appear in the display (Fig. 3). A
beep will sound and
"12h" (Fig. 5) or "24h" (Fig. 6) will
appear in the display.
2. Press
Clean
to switch between the 12 and 24 hour time
of day display. The display will show either "12h" (Fig.
5) or "24h" (Fig. 6).
3. Press
START
to accept the change or press
Clear
/Off
to
reject the change.
4. Reset the correct time as described in To set the
Clock above. Please note that if the 24 hour time of
day mode was chosen, the clock will now display time
from 0:00 through 23:59 hours.
Clock
1 3 0
START
Clock
for 6 seconds
Clean
START
or
Clear
/Off