Frigidaire 316901300 Use & Care Manual Download Page 29

Page: 29 / 32

Entire appliance does not operate.

• The time of day is not set. The time of day

must

first be set in order to

operate the oven. See “Setting the clock” in the

Setting oven controls

section.

• Make sure cord/plug is plugged correctly into outlet.
• Service wiring is not complete. Contact your dealer, installing agent or

authorized service agent.

• Electrical power outage. Check house lights to be sure. Call your local

electric company for service.

• Be sure the oven controls are set properly for the desired cooking feature.

See

Setting Oven Controls

in this manual or see “Entire appliance does

not operate” in this checklist.

Problem

Solution

Poor baking results.

• Many factors affect baking results. Make sure the proper oven rack position is

used. Center food in the oven and space pans to allow air to circulate. Allow

the oven to preheat to the set temperature before placing food in the oven. Try

adjusting the recipe's recommended temperature or baking time. If you feel

the oven is too hot or cool, see “Adjusting Oven Temperature” section in this

Use & Care Guide.

Oven portion of appliance does not

operate.

Self-cleaning cycle does not work.

• Oven control not set properly. Follow instructions under

Self-cleaning.

• Self-Cleaning cycle was interrupted. Follow steps under "Stopping or

Interrupting a Self-cleaning cycle" under

Self-cleaning

Surface burners do not ignite.

• Surface control knob was not completely turned to LITE. Push in & turn the

surface control knob to LITE until burner ignites and then turn control knob

to desired flame size.

• Burner ports are clogged. With the burner OFF, use a small-gauge wire or

needle to burner head slots and ignition ports. See “Cleaning the cooktop

and surface burners” in the

Care & Cleaning

section for additional

cleaning instructions.

• Range power cord is disconnected from outlet (electric ignition models

only). Be sure power cord is securely plugged into the power outlet.

• Electrical power outage (electric ignition models only). Burners can be lit

manually. See section on

Setting Surface Controls

Surface burner flame only part way

around burner cap.

• Burner slots or ports are clogged. With the surface burner OFF, clean ports

with a small-gauge wire or needle.

• Moisture is present after cleaning. Lightly fan the flame & allow burner to

operate until flame is full. Dry the surface burners thoroughly following the

instructions under “Cleaning the cooktop and surface burners” provided in

the

Care & Cleaning

section.

Surface burner flame is orange.

• Dust particles in main gas line. Allow the burner to operate a few minutes

until flame turns blue. In coastal areas, a slightly orange flame is

unavoidable due to salt air.

Solutions to common problems

•

BEFORE YOU CALL

Summary of Contents for 316901300

































Search results

Summary of Contents for 316901300

Reviews:

Related manuals for 316901300

Brands by name

Popular brands

Frigidaire 316901300, Use & Care Manual

Search results

Summary of Contents for 316901300

Reviews:

Related manuals for 316901300

Brands by name

Popular brands