Frigidaire 242288200 Use And Care Manual Download Page 24

Page: 24 / 32

CARE & CLEANING

Care and Cleaning Tips

Part

Cleaning Agents Tips and Precautions

Interior

& Door

Liners

•

Soap and water

•

Baking soda and

water

• Use two tablespoons of baking soda in one quart

of warm water.

•

Be sure to wring excess water out of sponge or

cloth before cleaning around controls, light bulb or

any electrical part.

Door

Gaskets

•

Soap and water

•

Wipe gaskets with a clean soft cloth.

Drawers &

Bins

•

Soap and water

•

Use a soft cloth to clean drawer runners and

tracks.

•

Do not wash any removable items (bins, drawers,

etc.) in dishwasher.

Glass

Shelves

•

Soap and water

•

Glass cleaner

• Mild liquid sprays

•

Allow glass to warm to room temperature before

immersing in warm water.

Toe Grille

•

Soap and water

• Mild liquid sprays
•

Vacuum

•

Remove toe grille (see Installation Instructions).

•

Vacuum both sides and wipe with sudsy cloth or

sponge. Rinse and dry.

Exterior &

Handles

•

Soap and water

•

Non abrasive

glass cleaner

•

Do not use commercial household cleaners

containing ammonia, bleach or alcohol to clean

handles.

•

Use a soft cloth to clean smooth handles.

•

Do not use a dry cloth to clean smooth doors.

Exterior &

Handles

(Stainless

Steel

Models

Only)

•

Soap and water

•

Stainless steel

cleaners

•

Never use CHLORIDE or cleaners with bleach to

clean stainless steel.

•

Clean stainless steel front and handles with non-

abrasive soapy water and a dishcloth. Rinse with

clean water and a soft cloth.

•

Use a non-abrasive stainless steel cleaner.

These cleaners can be purchased at most home

improvement or major department stores. Always

follow manufacturer’s instruction. Do not use

household cleaners containing ammonia or bleach.

NOTE: Always clean, wipe and dry with grain to

prevent scratching.

•

Wash the rest of the cabinet with warm water and

mild liquid detergent. Rinse well and wipe dry with

a clean soft cloth.

Replacing

Light Bulbs

•

Unplug

refrigerator

•

Wear gloves

•

Remove light

cover

•

Replace old bulb

•

Replace light

cover

•

Plug in the

refrigerator

CAUTION: Wear gloves when replacing light

bulbs to avoid getting cut.
Use same wattage when replacing bulb.

Summary of Contents for 242288200

































Search results

Summary of Contents for 242288200

Reviews:

Related manuals for 242288200

Brands by name

Popular brands

Frigidaire 242288200, Use And Care Manual

Search results

Summary of Contents for 242288200

Reviews:

Related manuals for 242288200

Brands by name

Popular brands