Frigidaire 242101800 Use & Care Manual Download Page 6

6

Install the wine cooler in the coolest part of a dry and 

• 

ventilated room, out of direct sunlight and away from 

heating ducts or registers. Do not place the wine 

cooler next to heat-producing appliances such as a 

range, oven or dishwasher. 
Level the wine cooler so the door closes tightly.

• 

Do not overcrowd the wine cooler or block cold air 

• 

vents. Doing so causes the wine cooler to run longer 

and use more energy. Shelves should not be lined 

with aluminum foil, wax paper or paper toweling. 

Liners interfere with cold air circulation, making the 

wine cooler less efficient.

Wipe bottles and containers dry before placing them 

• 

in the wine cooler. This cuts down on moisture build-

up inside the unit.
Organize the wine cooler to reduce door openings. 

• 

Remove as many items as needed at one time and 
close the door as soon as possible.

 

ENERGY SAVING TIPS

tEMpERAtuRE cOntROLS

The temperature range MIN and MAX is 41° - 64° F, 

which is ideal for wine storage.

fEAtuRES

Adjustable Interior Shelves 

Multi-position adjustable interior shelves can be moved 

to any position for larger or smaller bottles. The shipping 

spacers that stabilize the shelves for shipping should be 

removed and discarded.

Interior Light (Some models)

The light comes on automatically when the door is 

opened. To replace the light bulb, turn the temperature 

control to OFF and unplug the electrical cord. Replace the 

old bulb with a bulb of the same wattage.

appliances.

 

GB-T 23777-2009   

Wine Cooler

 

International or other national or regional standards: 

UL 250 BULLETINS-2003 

U.S.A. household fridge safety requirements

 

IEC 61000-3-4-1998   

Electromagnetic compatibility (EMC) - Limits - 

Limitation of emission of harmonic  currents in low-voltage power supply 
systems for equipment with rated current greater than 16 A

 

UL 250 BULLETINS2-2003 

 

U.S.A.  household  fridge  safety 

requirements

 

Enterprise Standard 

Q/MB 004-2007 

Wine Cooler

 

 

 

 

 

 

 

Know About Wine Cooler

ķ

 

 

ĸ

Ĺ

ĺ

Ļ

 

ļ

 

 

Fig. 1 

The illustration might be different from the actual products. 

- 6 - 

1

Lamp assembly

2

Glass door

3

Steel wire racks

4

Temperature knob

5

Lamp control switch

6

Adjustable leg

Adjust temperature gradually: move the knob in small 

• 

increments, allowing the temperature to stabilize.
For colder temperatures, turn the knob towards 

• 

Colder.
For warmer temperatures, turn the knob towards 

• 

Cold.

Cool Down Period

For best performance, allow 4 hours for the wine cooler 

to cool down completely. The wine cooler will run 

continuously for the first several hours. 

Temperature Control

Note that by turning the temperature control knob to 

OFF, it only stops the cooling cycle but does NOT turn off 

the wine cooler.
If the wine cooler is unplugged from the power supply, 

you must wait 3 to 5 minutes before restarting the wine 

Cooler.

1

6

5

4

3

2

Summary of Contents for 242101800











Reviews: