background image

6

DO THIS:

PRESS TO

SELECT:

FASTER

SLOWER

DO THIS:

PRESS TO

SELECT:

FASTER

SLOWER

DO THIS:

PRESS TO

SELECT:

FASTER

SLOWER

DO THIS:

PRESS TO

SELECT:

FASTER

SLOWER

DO THIS:

PRESS TO

SELECT:

FASTER

SLOWER

DO THIS:

PRESS TO

SELECT:

FASTER

SLOWER

DO THIS:

PRESS TO

SELECT:

FASTER

SLOWER

DO THIS:

PRESS TO

SELECT:

FASTER

SLOWER

DO THIS:

PRESS TO

SELECT:

FASTER

SLOWER

DO THIS:

PRESS TO

SELECT:

FASTER

SLOWER

DO THIS:

PRESS TO

SELECT:

FASTER

SLOWER

DO THIS:

PRESS TO

SELECT:

FASTER

SLOWER

DO THIS:

PRESS TO

SELECT:

FASTER

SLOWER

DO THIS:

PRESS TO

SELECT:

FASTER

SLOWER

DO THIS:

PRESS TO

SELECT:

FASTER

SLOWER

DO THIS:

PRESS TO

SELECT:

FASTER

SLOWER

DO THIS:

PRESS TO

SELECT:

FASTER

SLOWER

DO THIS:

PRESS TO

SELECT:

FASTER

SLOWER

DO THIS:

PRESS TO

SELECT:

FASTER

SLOWER

DO THIS:

PRESS TO

SELECT:

FASTER

SLOWER

DO THIS:

PRESS TO

SELECT:

FASTER

SLOWER

DO THIS:

PRESS TO

SELECT:

FASTER

SLOWER

TO USE AUTO 

 FEATURE:

YOU WILL SEE:

TO USE AUTO 

 FEATURE:

YOU WILL SEE:

TO USE AUTO 

 FEATURE:

YOU WILL SEE:

TO USE AUTO 

 FEATURE:

YOU WILL SEE:

TO USE AUTO 

 FEATURE:

YOU WILL SEE:

TO USE AUTO 

 FEATURE:

YOU WILL SEE:

TO USE AUTO 

 FEATURE:

YOU WILL SEE:

TO USE AUTO 

 FEATURE:

YOU WILL SEE:

TO USE AUTO 

 FEATURE:

YOU WILL SEE:

TO USE AUTO 

 FEATURE:

YOU WILL SEE:

TO USE AUTO 

 FEATURE:

YOU WILL SEE:

TO USE AUTO 

 FEATURE:

YOU WILL SEE:

TO USE AUTO 

 FEATURE:

YOU WILL SEE:

FAN

LIGHT ON

 ) or down( 

 ) button until

the desired temperature is seen on the display. This tempera-
ture will be automatically maintained anywhere between 60˚F
(16˚C) and 90˚F (32˚C). If you want the display to read the
actual room temperature. See “To Operate on Fan Only” sec-
tion on Page 7.

Note:

Fan starts at High Speed and adjusts to a slower speed

as the room temperature dictates. For example if the room
doesn’t get too warm, it will stay at the slowest speed. If the
room temperature rises quickly, such as a door being opened,
it will automatically go to  the  highest speed. The fan speeds
will re-adjust back to the slowest speed as the room returns to
the original set temperature. Press either the fan slower or fan
faster button to adjust the fan speed manually.

LIGHT On

Summary of Contents for 200 BTU Mini Compact Room Air Conditioner













Reviews: