FriFri Basic 211 Installation And User Manual Download Page 54

Page: 54 / 58

AULT

RECTIFICATION

7 - 2

OM - 1.0 - 25.10.2004

7.2

Safety thermostat

The deep fryer is equipped with a safety thermostat according to the current regulations.

The safety thermostat triggers at a temperature of 213 °C.

The safety thermostat switches off the deep fryer in the following situations:

Manual restarting of the deep fryer after an emergency cut-out by the safety thermostat:

CAUTION
•

The control thermostat is defective.

•

Part of the cable connection to the control thermostats is defective or has come loose.

•

Part of the cable connection is not connected or falsely connected to the control thermostats.

•

A power failure (mains) has occurred.

•

The frying oil temperature is too high.

•

The heating elements are heating “dry”, i.e. no frying liquid is present.

•

Too little frying liquid is present.

ADVICE
•

Clarify reason for the triggering of the safety thermostat.

•

Actuate "On/Off" membrane switch.

•

Actuate "Safety reset" membrane switch.

Summary of Contents for Basic 211



























































Search results

Summary of Contents for Basic 211

Reviews:

Related manuals for Basic 211

Brands by name

Popular brands

FriFri Basic 211, Installation And User Manual

Search results

Summary of Contents for Basic 211

Reviews:

Related manuals for Basic 211

Brands by name

Popular brands