FriendlyARM MINI2440, User Manual

Page: 12 / 79

2. How to use MINI2440
Linux image was loaded before shipment (supervivi
、
zImage_n35
、
root_default.img)
，
Note the
procedures below will be run under Windows
。
2.1 Hardware Setup
2.1.1 Boot Mode
Boot mode can be selected by S2, according words on silk screen
：
S2 connect to Nor Flash side
，
system will boot from Nor Flash
；
S2 connect to Nand Flash side
，
system will boot from Nand Flash
。
BIOS which pre-loaded in Nor Flash and Nand Flash are the same in shipment. By default, S2 had
been connected to Nand Flash.
2.1.2 External connection
1. Connect serial port 0 to PC COM port by a dummy modem cable
2. Connect Ethernet port to PC by a cross cable
3. Connect DC 5V power adapter to power supply in
4. Connect your phone set to stereo out(Green)
5. Connect your LCD module to LCD connector
6. Connect with PC by a USB cable