Address: Room 1705,Block A1, Longyuan Plaza, Longkouxi Road, Guangzhou, China, 510640 Website:
http://www.arm9.net
Sales: +86-20-85201025 Tech Support: +86-13719442657 Fax: +86-20-85261505
Email for Business and Cooperation:
Email for Tech Support: [email protected]
第
- 75 -
页
4.1.2 Hardware Connection
Please follow the steps below to hook up the board:
Connect a 210 board’s serial port0 (Debug Serial Port) to a PC’s serial port with the
shipped
crossover serial cable (blue one)
in the package
Connect the 210 board’s Ethernet interface to a PC with the shipped crossover cable
(this step can be skipped if you don’t need to connect to the internet)
Connect the shipped 5V power supply adapter to the 5V power supply interface on
the board (do it with care to prevent damaging the interface)
Connect a headphone or speaker to the audio input(green) on the board
Connect an LCD touch screen (if the user has one) to the LCD interface on the
board following the data bus’ arrow
4.1.3 Setting up Super Terminal
Note: some users attempt to expand the board’s serial ports by using a USB to
serial port cable. Sometimes this operation would cause error codes. This might be
an indication that the cable doesn’t work. Most of our agents have these
conversion cables for sale. Users can contact them. In addition we strongly
recommend users to use our shipped crossover serial cable. Other serial cables
might not work properly.
To connect the 210 board to a host PC via a serial cable, you should use a simulation
terminal. There are many tools available. A most widely used one is the MS-Windows’
