77
Replacement Remote Control Configuration Instructions
For Use with Kühl
(cool only models)
and Kühl +
(cool & heat models)
Contents:
•
Remote
Control
with
Holder
•
(2)
AAA-batteries
•
Instruction
Sheet
ATTENTION! – You May Need to Configure The Replacement Remote Control
Please read instructions completely before attempting configuration of the Remote Control. Failure to
do so could result in the Remote Control not being able to operate the Air Conditioning Unit properly.
Step 1. A. Locate the Model # of your Air Conditioner.
B. Identify the prefix (First 2 Letters) of your unit’s model #.
C. Look at the chart below and in it, find the prefix of your AC unit’s model #.
D. Note the Option # Code (OPT#) next to it and the required action. The unit’s
display is supposed to show this OPT# Code.
Model Prefix
Option Code
Required Action
SS, SM
OPT 1
None –
Remote Control configured for use with air conditioner
SL
OPT 2
Perform Steps 2 - 5
YS, YM, YL, ES, EM, EL
OPT 3
Perform Steps 2 - 5
Step 2.
Point the Remote Control at Air Conditioning Unit and then press the Remote Control’s
POWER
Key once to illuminate the Air Conditioning Unit’s display.
Step 3.
Once the display on the Air Conditioning Unit is illuminated, check the
Option Code
number
(OPT#)
shown in the display and ensure it matches the OPT# code for your unit
as per the chart above.
Air Conditioner Unit’s Display
(see example below Fig 1)
OPT1
OPT2
OPT3 Displayed example
Figure 1
Kühl Remote Control
