Documentation notes 2
4
Maintenance Bypass PMC12 1 - 3 kVA
EN
2
Documentation notes
The audience for this guide is the technical spe-
cialist familiar with the assembly, installation and
operation of the Rittal PMC12 System.
•
You should read this operating guide prior
to commissioning and store the guide so it is
readily accessible for subsequent use.
Rittal cannot accept any liability for damage and
operational malfunctions that result from the non-
observance of this guide.
2.1 Retention of documents
This guide and all associated documents are part
of the product. They must be given to the operator
of the unit and must be stored so they are avail-
able when needed.
2.2 Symbols used
The following safety and other notes are used in
this guide:
Symbol for handling instructions:
•
This bullet point indicates that you should per-
form an action.
Safety and other notes:
Danger!
Immediate danger to health and life!
Warning!
Possible danger for the product and
the environment!
Note!
Useful information and special features.
3
Safety instructions
-
Only a trained electrician, in particular for
wiring the enclosures with mains power, may
perform assembly and installation of the UPS
System. Other tasks, such as the assembly
and installation of system components with
tested standard connectors, and only in-
structed personnel may perform the operation
and configuration of the System.
-
Do not open the case, as there are no ser-
viceable parts inside. Your warranty will be
void.
-
Do not try to repair the unit yourself; contact
your local supplier or your warranty will be
void.
-
If liquids are spilt onto the System or foreign
objects dropped into the unit, the warranty will
be null and void.
-
Do not install the system in an environment
with sparks, smoke or gas.
-
The Unit is designed to be installed and
commissioned in a sheltered, controlled envi-
ronment as follows:
-
Operating temperature 0-40°C and 0-
90% non-condensing humidity.
-
Always avoid contact with direct sun-
light.
-
Do not install in inflammable or hazard-
ous environment.
-
Dusty,
corrosive
and
salty
envi-
ronments can do damage to the Unit.
-
Install the system indoors as it is not
designed for installation outdoors.
-
Install the system away from objects that
give off excessive heat and areas that are ex-
cessively wet.
-
Always switch off the maintenance by-
pass when relocating it.
-
Make sure that the AC main supply outlet
is correctly grounded.
-
Please ensure that the input voltage
matches the utility supply voltage.
-
Observe the valid regulations for the elec-
trical installation for the country in which the
unit is installed and operated, and the national
regulations for accident prevention. Also ob-
serve any company-internal regulations (work,
operating and safety regulations).
•
Use only genuine or recommended parts and
accessories. The use of other parts can void
the liability for any resulting consequences.
