Operation
Starting up and temperature regulation
The temperature selector knob is located
on the top of the refrigerator compartment.
Setting 0 means:
Setting 1 means:
Setting 7 (end-stop) means:
Off.
Clockwise rotate the knob to turn on the
appliance
Highest temperature, warmest setting.
Lowest temperature, coldest setting.
Turning the temperature control to “0"
position stops the cooling cycle, but does not
shut off the power to the refrigerator.
Turning clockwise in direction refrigerating
u n i t
o n ,
t h e
l a t t e r
t h e n
o p e r a t i n g
automatically. If the unit is unplugged, power
lost, or turned off, you must wait 3 to 5
minuters before restarting the unit. If you
aattempt to restart before this time delay, the
refrigerator will not start.
Insert the plug of the connection lead into
the plug socket with protective earth
c o n t a c t .
W h e n
t h e
r e f r i g e r a t o r
compartment door is opened, the internal
lighting is switched on.
Important!
Important!
Reason:
Normally we advise you select
setting of 2 or 3 or 4, if you want the
temperature higher or colder please turn the
knob to warmer or colder setting accordingly.
When you turn the knob to
er which can
lead to the more energy efficiency.
Otherwise, it would result the energy-
consuming.
High ambient temperatures (e.g.
on hot summer days) and a cold setting
(position 6 to 7) may cause the compressor
to run continuously or even non-stop!
when the ambient temperature is
high, the compressor must run continuously
to maintain the low temperature in the
appliance
cold
9
Then remove the controller box
.
3
Temperature regulator
7
6
5
4
3
2
1
0
Sketch map
Summary of Contents for MC55210
Page 1: ...MC55210S MC55210...
