FRICON MBB 125, Maintenance And Operation

Page: 28 / 90

Eutectic Refrigerators and Freezers English
26
Cleaning the Exterior:
•
Clean the equipment’s exterior with a soft sponge soaked in warm water and
soap.
•
Then clean with a soft cloth and dry.
•
The
refrigerator circuit’s exterior (compressor, condenser, connection tubes,
and remaining components) must be cleaned with a soft brush or vacuum
cleaner.
•
Wash the plastic parts with neutral soap and water and dry them with a soft
cloth. Never use alcohol, diluents, or acetone!
•
While cleaning, be careful not to twist the tubes or disconnect cords.
NOTES:
•
Do not use abrasive materials or mops as they will definitively damage the
appliance’s surface.
•
Do not remove fixed parts for cleaning. If necessary, they must be cleaned
by qualified personnel.
Replacing Components :
If any component is damaged, it must be replaced by an individual qualified for
this task.
8. Problem Resolution Guide
The Equipment Does Not Operate
•
Check if there is an electric current.
•
Check if the plug is properly inserted in the source outlet and if the voltage
and frequency are appropriate for operation.
Temperature is Unsatisfactory
•
Check if the equipment has been connected long enough to have reached
operable temperature.
•
Check if the appliance is not near heat sources.
•
Check if the lids are properly closed.