background image

4

Soloclim

GB

General

  After unpacking, check that the contents are intact and 

that all parts are included. If not, contact the agent who 
sold the appliance to you.

  The appliance must be installed by an authorised 

company.Once the work is done, it must issue a 
declaration of conformity to the client in compliance 
with current Regulations and with indications on the 
instruction manual supplied with the appliance.

  These appliances have been designed for conditioning 

and/or heating rooms and they must be destined solely 
for this purpose compatibly with their performance 
characteristics.

 

The manufacturer refuses any contractual or extra-
contractual responsibilities for damage caused to people, 
animals or things resulting from incorrect installation, 
adjustment, maintenance or improper use.

  In the event of water leaks, turn off the main switch and 

close the water taps.

 

Immediately call the Technical Assistance Service 
or other qualified personnel and do not intervene 
personally on the appliance.

  The use of products that use of electricity and water 

requires the observation of some fundamental safety 
rules such as:

  The unit can be used by children over the age of 

8, and by people with reduced physical, sensory or 
mental capabilities, or with no experience or necessary 
knowledge, as long as they remain under surveillance or 
after they have received instructions on the safe use of 
the unit and have understood the dangers involved.

 

Children must not play with the appliance.

   The cleaning and maintenance that must be performed 

by the user must not be carried out by children without 
supervision.

  It is forbidden to modify the safety or adjustment 

devices or adjust without authorisation and indications 
of the manufacturer.

  It is forbidden to pull out or twist the electric cables 

coming out of the unit, even when disconnected from 
the mains power supply.

General

General warnings

  A temperature that is too high or too low is harmful to 

health and is an unnecessary waste of energy.

 

Avoid prolonged direct contact with the air flow.

  Do not leave the room closed for long. Periodically open 

the windows to ensure proper ventilation.

  This instruction booklet is an integral part of the 

appliance and therefore it must be kept with care and 
must ALWAYS accompany the appliance even when 
the latter is transferred to another owner or user or 
transferred to another system. If it gets damaged or 
lost, please request another copy to the local Technical 
Assistance Service.

  Repairs or maintenance must be performed by the 

Technical Assistance Service or by qualified personnel 
in accordance with this manual. Do not modify 
or intervene on the appliance as this could create 
dangerous situations and the manufacturer will not be 
responsible for any damage caused.

      The appliance is declared to have a degree of protection 

IPX0, therefore it cannot be installed outdoors or in 
laundry rooms. 

Fundamental safety rules

  It is forbidden to introduce objects or substances 

through the aspiration grills and the air outflow.

  It is forbidden to open the access doors to the internal 

parts of the appliance without having turned off the 
main switch first.

  It is forbidden to dispose of, or leave in the reach of 

children, the packaging materials which could become a 
source of danger.

  It is forbidden to climb onto the appliance and/or to 

place any type of object on top of it.

Summary of Contents for Soloclim SC17




















Reviews: