L’appareil est fourni avec un gabarit
mural sous forme d’emballage. Ce
gabarit a pour objectif de vous aider à
positionner le frigorifère.
L’orifice de Ø75 est indiqué ainsi que
l’emplacement des quatres vis. Les
cotations sont également indiqués afin
de préparer au mieux votre façade à
accueillir le frigorifère.
10
Genesis-Vintage
Installation
MPCG
After having chosen the installation configuration of your monobloc, you will need to install the front panel
in black plexiglass according to your configuration, in IN - OUT configuration it will be of no use to you, in this case
keep it aside.
1-Installation on the condenser side in OUT mounting.
2-Installation on the condenser side in IN mounting.
In this configuration unclip the cache
passage of the solenoid valve, to let the
passage of the switch.
Unclipping
rear
In this configuration it will first be necessary to fix the probe located in the box of the remote control
and connect it to the RJ12 coming out of the device before fixing the front panel to the device.
Unclip the base of the probe by pulling it backwards and fix it
using the screw provided on the probe blocker.
Probe
support
Probe
Probe blocker
screws to use
