8.
Replacement of blade
The blade of your scraper tool FWSG RA is
characterized according
to the type of tool to one of the front sides with 32/40 or 50/63.
It
has two cutting edges. At delivery the blade is installed by default that
you can see the dimension. If no identification is visible, the second
cutting edge is already in use. Is this cutting edge worn, a new blade
must be used.
Insert a new blade always a way that the dimension is legible.
DANGER!
Risk of injury at the blade.
• Loosen the countersunk screw with a TorxPlus IP15 wrench.
• Turn the blade 180° clockwise.
• Fasten the countersunk screw with a TorxPlus IP15 wrench. Maxi-
mum torque: 3 Nm.
IMPORTANT!
Please note when replacing the blade that only a replacement
blade according to following table is used.
Replacement Blade Set
Order No.
FWSGE 10 for FWSG RA 32 and 40
613329
FWSGE 11 for FWSG RA 50 and 63
613330
17
2409/3 . X.10 . Update: 04.10.2010
English
