TDR-M
EN
28 / 32
6.2
Replace a lamp
WARNING
Remove the power plug from the wall socket
.
WARNING
Do not touch the lamps with bare hands.
Use a clean cloth or paper tissues
when replacing the lamp.
Remove any moisture with alcohol or methyl spirits after the lamp has cooled down.
3.
Remove the grid
4.
Remove the broken lamp by moving it in the length-direction of the lamp holder.
5.
Install the new lamp (230 V
– 500 W). First press one side of the lamp into the lamp
holder (A). Press lamp in its correct position (B) and use its spring pressure to make
contact with the other terminal.
6.
Make sure the lamp is correctly clamped between the two terminals (C). If this is not
the case, the lamp can move freely along its length-direction, until it is fixed into its
terminals.
7.
Remount the grid.
Summary of Contents for TDR5-M
Page 3: ...TDR M EN 3 32 Empty page...
Page 31: ...TDR M EN 31 32 Notes...
