TDR-P
eco
Gas
EN
14 / 48
•
North American units must when installed be electrically grounded in accordance with local
codes, or in the absence of local codes, with the National Electric Code, NFPA 70, or the
Canadian Electrical Code, CSA C22.2, as applicable.
•
North American units equipped with casters must be installed with connectors that comply
with the Standard for
Connectors for
Movable Gas Appliances, ANSI Z21.69 • CSA 6.16
.
This connection must include a quick disconnect device that complies with the Standard for
Quick Disconnect Devices for
Use With Gas Fuel, ANSI Z21.41 • CSA 6.9.
•
Adequate means must be provided to limit the movement of the appliance without
depending on the connector and quick-disconnect device or its associated piping to limit the
appliance movement. The restraining device should be attached to the appliance tether
bracket.
restraining suggestion
3.4
First use
When using the unit for the first time, clean the interior thoroughly with soap suds and heat up the
unit, see section 3.4.1. After commissioning discoloration of the cooking/grilling area can occur.
Summary of Contents for TDR 7 p Gas
Page 3: ...TDR P eco Gas EN 3 48 Empty page...
Page 45: ...TDR P eco Gas EN 45 48 Notes...
Page 46: ...TDR P eco Gas EN 46 48 Notes...
Page 47: ...TDR P eco Gas EN 47 48 Notes...