LDR 8 s AC GAS
EN
18 / 32
5.
OPERATE
5.1
Starting a program
1. Press
.
2. Select the required program. The total duration of the
program is shown in minutes next to the program name.
3. Press
.
5.2
Reset burner controller
Message
“Burner failed, check gas supply and reset burner”
appears on screen when the burner is not in operation when
needed.
1. Reset the burner by pressing the Reset button on screen.
The unit will now attempt a re-start.
After 3 repeated failures the burner goes into error mode and
the message
“Gas burner failure. Call tech support” appears.
2. Call technical support to assist.
3. Press the OK button to accept the message.
Summary of Contents for LDR 8 s Auto Clean GAS
Page 3: ...LDR 8 s AC GAS EN 3 32 Empty page...
Page 29: ...LDR 8 s AC GAS EN 29 32 Notes...
Page 30: ...LDR 8 s AC GAS EN 30 32 Notes...
Page 31: ...LDR 8 s AC GAS EN 31 32 Notes...
