REMOVAL AND REPLACEMENT OF PARTS
Page 9
Service Manual Hot Deli Two Tier HDTT3/4/5/7 form 9124303 rev.06/2018
1. Open the left side panel according prior
procedure.
2. Take out the left side drawer.
3. Remove the 2 bolts that secure the suction
funnel.
4. Remove the bolt that secures the electric
panel and remove this panel.
5. Loosen the wiring of the blower.
6. Remove the bolts that secure the
mounting bracket on the blower.
7. Remove the blower by sliding this
towards yourself.
8. Reverse the procedure to install.
Note
: For the blower on the right hand side
skip step 4.
Note
2
:
The blower housing is connected to
the mounting plate by means of 2 pop rivets
of 4 mm (part nr. 4312352).
BLOWER, LEFT AND RIGHT HAND SIDE
1. Open the left side panel according prior
procedure.
2. Disconnect the lead wires to the
contactor.
3. Push the locking tab down with a screw-
driver and lift out to remove the contac-
tor from the mounting bracket.
4. Reverse the procedure to install.
CONTACTOR
