DISPLAY HUMIDIFIED MODEL (CONTINUED)
PROGRAMMING INSTRUCTIONS
Service Manual Hot Deli HD3/4/5/7 form 9123549 rev.03/2017
Page 12
Set the humidifier
Water consumption will amount to approx. 1.2 liter per hour in relation to the maximum
setting. Indication bar B6 indicates the humidification degree.
• 3/3, humidification 100%.
• 2/3, humidification 67%.
• 1/3, humidification 33%.
• 0, humidification switched off. The bottom segment of the indication bar will flash every
10 seconds.
1. Set the required humidification level with the keys B7 and B8.
Set the IR emitters
1. Press keys B1 for a short time to switch on or off the related IR emitter. The indication
light on top of the key will light up if the emitter is switched on.
Set the Offset
With the offset you only change the temperature indication on the display. The set point will
not be changed.
1. Press both temperature keys (B4 and B5) for 5 sec.
2. The offset temperature now appears on the screen with a flashing dot behind the value.
3. Use the temperature keys B4 and B5 to change the offset temperature.
4. After 5 seconds of no keys being pressed the system will return to normal operation.
Summary of Contents for HOT DELI 3
Page 2: ...Service Manual Hot Deli HD3 4 5 7 form 9123549 rev 04 2017 Page 2 TABLE OF CONTENTS EMPTY PAGE...
Page 7: ...Service Manual Hot Deli HD3 4 5 7 form 9123549 rev 04 2017 Page 7 TABLE OF CONTENTS EMPTY PAGE...
Page 122: ...Service Manual Hot Deli HD3 4 5 7 form 9123549 rev 03 2017 Page 122 EMPTY PAGE...
Page 123: ...Service Manual Hot Deli HD3 4 5 7 form 9123549 rev 03 2017 Page 123 EMPTY PAGE...
