Fri-Jado BV TG110-M, User Manual

Page: 20 / 24

TG
EN 20 / 24
6. MALFUNCTIONS AND SERVICE
Before you contact your supplier/dealer in case of a malfunction, there are some items you can
check yourself:

Is the power supply working properly? Check fuses and differential switch.

Has the timer clock been properly set?
Item Malfunction Possible action
Fan Fan not spinning

Remove the plug from the socket.

Open the door.

Remove fan plate (see section 5.2)
and check what's blocking the fan
blade.
Fan Noisy fan

Fan polluted, clean (see section 5.2).
Lamp Does not light up

Defect, refer to section 6.3
.
Oven Product is not getting done equally

Try a lower cooking temperature.

Check fuses and/or the differential
switch.
Oven The oven does not heat up

Open and close door.

Check fuses and/or the differential
switch.
Door Door hangs at an angle

Adjust door, see section 6.2
Mains cord Damaged

Replace, see section 6.1
6.1. Replace the mains cord
WARNING
Hazardous electrical voltage.
If the mains cord is damaged, it must be replaced by the manufacturer, his service agent or a
similarly qualified person in order to avoid hazards.
6.2. Adjust the door
On the inside of the door, at the top, there is an adjustment screw. Adjustment of the door is done
as follows:
1. Open the door.
2. Support the door from underneath and loosen both bolts in the top hinge on the inside of
the door by one turn.
3. Position the door correctly so that the underside of the door, in the closed position, is
parallel to the front below it.
4. Tighten the mounting bolts.