FREUND ELEKTRONIKA d.o.o
International Burch University | Francuske revolucije bb | 71210 Ilidza | Bosnia and Hercegovina
www.ip
-
integra.ba | info@ip
-
integra.com | Tel. +387 33 922 890
Users can configure the upper and lower bound and when
photoresistor value is larger than upper bound, infrared LED will
turn on. As contrast, when photoresistor value is smaller than
lower bound, infrared LED will turn off and device turns to
normal mode.
4.1.3. RFID Card Code Display Related
Go to
Intercom
-
Advanced
to configure.
Display mode:
To be compatible different card number formats
in different systems. The default 8HN means hexadecimal.
4.1.4. Key Display Related
Go to
Intercom
-
Basic
to configure.
Send Key:
Limit to use the
“#” key. It will prevent someone to
enter the LCD setting illegally.
DialPad Input Number Limit:
To limit the input numbers to
prevent unnecessary security problems.
Figure 4.1.4-1 Send key
Figure 4.1.4-2 Dialpad input number limit
Figure 4.1.3 RFID card code display related