Thank you for choosing SPARSH VP210! Please read this guide first for
correct installation and retain it for future reference. The information in this
guide was current at the time of publication. All specifications are subject to
change without notice.
This Guide is meant to help you install and connect the phone to make and
receive calls. For detailed installation instructions, refer to the System Manual.
Copyright
All rights reserved. No part of this document may be copied or reproduced
in any form or by any means without the prior written consent of Matrix
Comsec Pvt. Ltd.
Warranty
Limited Warranty. Valid only if primary protection is provided, mains supply is
within limit and protected, and environment conditions maintained within
product specifications. Complete warranty statement is available on our
website: www.MatrixTeleSol.com
Know Your SPARSH VP210
SELECT A LOCATION
Step 1
Ÿ
SPARSH VP210 Phone
Ÿ
Handset with handset cord
Ÿ
Ethernet Cable
Ÿ
Stand
What Your Package Contains
Installing SPARSH VP210
While talking, Press to increase and press to decrease
Speech volume.
When the phone rings, Press to increase and press to
decrease Ringer volume.
Volume Keys
1.
LCD Screen
2.
Ringer LED
3.
Navigation Key/SIP Line Key
4.
Context Sensitive Key
5.
Dial Pad
6.
Volume Increase Key
7.
Volume Decrease Key
8.
Speaker Key
9.
Mute
10.
Headset Key
11.
Handset
1
2
3
4
4
ghi
5
jkl
6
mno
7
pqrs
8
tuv
9
wxyz
*
#
0
2
abc
3
def
1
5
6
7
11
9
8
10
Mount SPARSH VP210 on the Desk
Stand
Page 1
Image A
Ÿ
Stand Attached at 45 Degree angle.
Attach the Stand
Ÿ
You can attach the Stand in the following ways - at an angle
of 45 degrees and 55 degrees as shown in
Image A
and
Image B
.
