How to Make Custom Sized Bags
This vacuum sealer is equipped with a vacuum bag roll storage compatible with a roll of 5 meter vacuum bag.
1. Open lid. Put a bag roll into the roll storage area, pull enough bag material to hold item to be vacuum packaged, plus 2 inches.
Use the embedded cutter on the sealer to cut desired bag length from bag roll. Make sure to cut in a straight line. Plug in
power cord.
2. Place one end of cut bag onto sealing strip, don’t worry if you accidently place any material onto the gasket area.
3. Close lid by pressing down on both sides until two ’’click’’ sound heard.
4. Now that lid has been locked, press the ’’SEAL’’ button to create a custom sized bag. The indicator light illuminates during the
seal process.
REMARK : When the sealer is used for the first time, the sealing line may not be well done, this is because the heating bar
needs time to reheat, in this case, just try another time.
5. Once completed the indicator light of seal button will turn off; press the release buttons on both sides of the machine, it is now
safe to take out the newly created bag.
6. The custom sized bag is now ready for vacuum sealing.
CAUTION :
Make sure you give the appliance time to cool down. Wait at least 20 seconds between seals.
Under very heavy usage, appliance will shut off automatically to prevent overheating. If it does, wait 25 minutes
to allow appliance to cool off.
How to Vacuum Seal with the Vacuum Bags
