Cool-Spot in operation
User Manual
Cool-Spot.nl
7
Vapour exits the CS exhaust console nozzles unevenly:
It is normal for the vapour to exit the nozzles irregularly at times.
It may appear as less vapour is emitted by the first two nozzles next to the main column,
but this is partially an optical illusion caused by the aerodynamics of the vapour jet.
When configuring the vapour system in the factory, the so-called spoilers are positioned inside
the console to ensure the most even exhaust effect as possible.
The spoilers can be readjusted on-site if necessary.
The effect of draught near the Cool-Spot:
The Cool-Spot climate consists of a mix of cold air and vapour and is transferred to the buffet or
work surface as gently as possible. It essentially floats over the buffet to the edge of the surface.
As a result, the effect of the cold energy on the product is optimised with a minimum loss of energy.
The floating cool climate is vulnerable, comparable to smoke that can be dispersed with the
wave of a hand. Strong draughts resulting from open doors in the room or a poorly balanced
exhaust system may disrupt the effect of the chilled climate at times.
A more powerful airflow can mitigate this disruptive effect.
However, this will also cause the majority of the climate to be forced across the surface which
will increase the rate of energy loss and decrease the cooling effect.
What can you do to reduce the effect of draughts?
If you notice that the pattern of vapour outflow is subject to strong fluctuations, is being blown
away or pulled underneath the console upon activating or deactivating the exhaust, it is clear
that the exhaust needs to be adjusted.
Air streams in the room where the Cool-Spot is located cannot be avoided, one way of dramatically
improving the behaviour of the vapour jet is by protecting the CS piece with a room divider, mobile
wall panel, tall piece of furniture or a large plant trough.
Recap:
At Cool-Spot BV, we are aware that condensation drops from the vapour nozzles or the stainless
steel elements may cause some nuisance while the equipment is being used.
Unfortunately, condensation cannot be completely avoided, as explained above.
Regular removal of drops requires your awareness and takes time.
In our experience, Cool-Spot users quickly learn to deal with these minor discomforts and they
are strongly outweighed by the benefits that the Cool-Spot system has to offer.
Feel free to get in touch by telephone or email for any questions or further explanation.
We are here to support you and ensure maximum satisfaction
with our Cool-Spot system.
Fresh stays
Fresh
0031-355244137
Summary of Contents for Cool-Spot
Page 1: ...User Manual V3 ...
Page 2: ......
