Fresh-Aire FALLH-01 Series Quick Start Manual Download Page 3

Unique Features and Specifications 

 

Ultrasonic Technology 

This humidifier uses ultrasonic high frequency technology to turn the water into 1-5 million 

super particles that are dispersed into the air evenly. 

 

Wick 

Includes 3 wicks. One wick is already installed and there are 2 additional replacement 

wicks included. 

 

120V AC Adaptor Included 

Perfect for use at home, in the office, or on-the go. 

 

Voltage                  Tank Capacity 

5V DC                                350ml   

 

How to Use 
 

 
 
 
 
 

           

 

 

Power ON/OFF 

Insert single pin plug into base of humidifier, then plug unit in to a 120 volt AC electrical 

outlet. Push the POWER        Button once to turn unit on with light. Push POWER       

Button again to keep the unit on with light off .Push the POWER        Button again to turn 

the unit off.

 

 

How to Fill the Humidifier 

CAUTION: Before filling with water, turn power off and unplug. 

 

1.  To remove the mist spout, turn the top to right until the icons align 

In the “unlock”      position. Lift up to remove the mist spout and                   

               

Set it aside. (See Fig. 3) 

2. 

NOTE

 :For first time use and with each new wick, you must 

soak the wick in water before operating. Unlock the spring loaded   

wick by turning the wick holder to the left. Remove the wick from the 

wick holder and soak the wick in water for 20 minutes. Return the   

wick to the wick holder and secure to the humidifier top cover by               

 

turning to the right.(See Fig. 4) 

CAUTION

: DO NOT operate the humidifier without first soaking 

the wick. The humidifier WILL NOT function without a wick or if   

the wick is dry. 

3.  Fill the water tank with clean, cool (not cold) tap water to the MAX       

FILL line. DO NOT OVERFILL. We recommend using distilled                   

 

Water if you live in a hard water area. (See Fig. 5)                                           

4.  Place the mist spout back on the unit, making sure the icons 

Align in the “unlock”      position. Look into place by turning the   

top to the left until the icons are aligned in the “lock”       

position. 

See Fig.6A

6B

 

NOTE: 

Be sure to wipe away and excess water from the top of   

the tank before replacing the mist spout.                                                         

     

5.  Plug adaptor into standard wall outlet. 

6.  To turn on, press the POWER      Button. The POWER      Button   

Will illuminate when the humidifier is ON. 

 

        NOTE: This humidifier does not include an Auto Shut-off when 

        the unit runs out of water. The unit MUST be unplugged when 

        not in use. Refill or turn off before the tank runs dry. Never leave 

        humidifier on if you will be away for more than 4 hours. 

 

FIG.1

 

FIG.2

 

Fig.3 

Fig.4 

Fig.5 

Fig.6A 

Fig.6B 

-- 3 -- 

 

-- 4 -- 

 

Reviews: