90PGA
Section 2
Dual Channel Programmable
Remote Operation
Amplifier Card
7
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: [email protected]
•
Web Address: http://www.freqdev.com
Set-Up: Remote Operation
1. Insert the
CDFC-01
CD into the PC
CDROM. Using Microsoft Explorer, select
the
Instrument Control Directory
and
“CLICK”
setup.
2. Follow instructions and the software will
place an icon on your desktop and in your
Program startup menu.
3. Connect the appropriate cable RS232 or
GPIB to the PC’s interface card and the
90IP.
4.
“DOUBLE CLICK”
on the 90IP icon and
the instrument controller set up Graphical
User Interface (GUI) will appear.
5. Select GPIB or RS232. For RS232, select
the COM port (1 or 2) location where the
RS232 interface card is installed in your
PC.
6.
“CLICK”
on
SCAN,
this will display an
instrument list.
“CLICK”
or highlight the
desired chassis, this will display an
instrument list of slot cards installed in the
90IP chassis.
7.
“CLICK”
or highlight a slot card, this will
launch the slot card GUI onto the PC screen,
allowing set-up of each channel configuration on
the slot card. At power down, the GUI will show
the last used settings of the slot card.
See
Figure 2
and read
Section 2.6
for a
detailed description of the above commands.
To
Reactivate the Soft Front Panel
after shut down, steps four (4) through seven (7) of the above
procedure
(Section 2.2)
must be performed.
