Frequency Central Infinitely Maybe, Build Documentation, Page: 5 / 5

Calibration
10K Noise:
Turn both CV inputs to maximum, this sends white and pink noise to the sample
and hold circuit. Turn the slew knob to minimum. Plug the SH Out into a filter set to self
oscillate, or a VCO, so you can monitor the random voltages the SH Out gives out. Adjust the
noise trimmer so the noise level is as loud as it can be without causing the S/H output to
slew. If it
’ s too loud, you ’ ll notice SH will slew or slide a little between voltages.
You ’ re done! Go do something random.
RDH 21/08/19
http://www.frequencycentral.co.uk/