Descriptions of LEFT and RIGHT are from the point of view of standing
behind the equipment facing the front
7
ASSEMBLY DIAGRAM 2
USE A PARTNER TO HELP WITH THIS STEP
REMEMBER: Only hand tighten all nuts and bolts until whole
&&Ͳ
X
ϰ
is assembled
1.
Slide a RUBBER BUMPER (65) down onto each GUIDE ROD (5) ensuring they are level with each other.
2.
Position the fourteen WEIGHT PLATES (67) onto the GUIDE RODS (5) ensuring the holes for the adjustor pin are facing
outward
3.
Connect the SELECTOR ROD (73) to the SELECTOR STEM (66) using a HEX BOLT M10X90 (113) and an AIRCRAFT NUT
M10 (97).
4.
Slide the connected selector parts (73&66) down over the GUIDE RODS (5) and into the centre of the WEIGHT PLATES
(67)
.*/%
.*/%
.*/%
.*/%
.*/%
.*/%
.*/%
.*/%
.*/%
.*/%
.*/%
.*/%
.*/%
.*/%
.*/%