FRENCH FITNESS FF-FT500, Assembly Manual

Page: 23 / 31

23
Appendix 1: P1—P12 Program Motion Diagram
Instruction on Common Errors of Treadmill
1: Electronic meter display: E01! Communication failure
Troubleshooting: check upper and lower control connection lines to see if they are well
connected; if so, replace the electronic meter or frequency converter
2: Electronic meter display: E05! Overcurrent protection
Troubleshooting: Overcurrent when the motor is running and excesses the set value; replace
motor
3: Electronic meter display: E08! Overvoltage protection
4: Electronic meter display: E09! Overload protection
5: Electronic meter display: E0A! Phase loss
Troubleshooting: check if three-phase connection wire is well connected to the frequency
converter
6: Electronic meter display: E0B! Raise and fall failure
Troubleshooting: check to see if the connection wire of incline motor is properly connected to
the frequency converter; replace motor
7: Electronic meter display: E0C! Overheat protection
8: Electronic meter display: Safety key disconnected
Troubleshooting: check if magnetic safety key is properly placed; if so, replace electronic meter