101-10051 OPERATING MANUAL ©2017-01-31 EN
The material is copyright protected
8
Running the Fiber Blowing Machine
Prepare the fiber cable and place it inside
the fiber blowing machine. Adjust the drive
wheels until they are tight around the fiber
cable
Place the microduct, which the fiber cable is
to be blown into, in the blowing junction
block
Close the lid and tighten the screws on top
On the TOUCH screen:
Set the desired speed (m/min)
Set the torque level to the desired
maximum
OPTIONAL: The preset meter counter can
be used to stop the machine after a
given distance (set to “0” and the
machine will continue indefinitely)
Press the ON/OFF button, and the machine
will accelerate to the preset maximum
speed
After 10-20 meters, turn on air. Gradually
increase air supply as the blowing is
proceeding.
The blowing is now running automatically
If the machine stops unintentionally, there
are two adjustable parameters:
increase air supply
or reduce speed if there is no more air
pressure
Stop the machine, either manually or when
reaching the preset distance
Turn off air
The lid can be opened when the air pressure
gauge is at “0” bar/psi
WARNING: Do not open the
machine while under pressure, as
this may damage the machine and
cause personal injury.
.
