P
a
g
e
| 32 of 44
FREMCO A/S
ELLEHAMMERVEJ 14
|
DK9900 FREDERIKSHAVN, DENMARK
|
VAT NO.: DK30815416
TEL45 7230 1213
|
|
WWW.FREMCO.DK
5 Monthly cleaning
Brush with a stiff brush (not a steel brush) and
wipe with a slightly damp cloth, possibly using a
mild detergent. Wipe the chain support rail,
chains, and sprockets clean of lubricant residues,
using a suitable cleaning agent (with the chains
removed)
PPE for inspection and maintenance
* Gloves for protection against hydraulic fluids and lubricating oil
* Protective glasses
* Protective shoes
Annual
inspection and maintenance
Annual inspection and maintenance must be performed by Fremco or another qualified service
partner before startup and with energy sources disconnected (quick couplings)
#
Task
Instructions
1 Check the safety functions
Ensure that the hold-to-run function works as
intended and the machine stops when the control
valve is released
2 Check the pressure gauge
Check the pressure gauge for accuracy
3 Check the air pressure relief valve
Ensure the air pressure relief valve functions as it
should
PPE for inspection and maintenance
* Gloves for protection against hydraulic fluids and lubricating oil
* Protective glasses
* Protective shoes
8.5.1. VISUAL INSPECTION
If any components are visibly worn, damaged and/or incorrectly mounted, this must be rectified
before the machine is operated.
8.5.2. CHAIN SUPPORT RAIL
The chain support rail must be replaced in case of one of the following wear indicators:
•
The rail is worn to 8.5 mm
•
The distance between the chain and chain support rail reaches a minimum of 1 mm