BT 2018 Lukas 136/170 – 01
Version – 05/2018
- 3 -
1. ASSEMBLY INSTRUCTIONS
Assembly must only be performed by trained specialist personnel.
We recommend that assembly be performed by two people,
following these steps:
1.1
On the inside of the bed, there are stickers with arrows
numbered from 1 to 4 (Fig. 1).
Arrange the side panels, the head end and the foot end
according to these numbers.
Fig. 1
Screw the side panels to the head end and foot end
according to the numbers (M8x100) (Fig. 2).
Fig. 2
Use the enclosed flat head screws (M8 x 100 mm) to attach the upper crossbeam based on the colour
arrangement (front or back).
Do not tighten the screws yet; leave some play to insert the rear wall!
