freightliner EconicSD, Operating Instructions Manual

Page: 82 / 212

Monitoring info menu
Reservoir pressure menu window
X
To display the reservoir pressure: use the
u or t button to scroll to ã moni-
toring info.
The menu window shows the reservoir pres-
sure of brake circuits \ and ^ as a
bar display.
Engine menu window
In the Engine Engine menu window, you can check
the engine oil level and display the engine's
operating hours. Check the engine oil level
before the start of every journey. The engine
oil level is not displayed while driving.
X
Park the vehicle on a level surface.
X
Apply the parking brake.
X
Switch off the engine.
X
Turn the key to the drive position in the igni-
tion lock.
X
Wait at least five minutes after switching off
the engine.
i
If you call up the oil level too early or while
the engine is running, Not available Not available
appears in the menu window.
X
Use the u or t button to scroll to ã
monitoring info.
X
To display the engine oil level and oper-
ating hours: use the r or s button
to scroll to the Engine Engine menu window.
The menu window shows:
R
the 4 engine oil level, e.g. Top up Top up
oil: 1 US gal oil: 1 US gal
R
the ý operating hours of the engine,
e.g. 10000 h 27 min 10000 h 27 min
The service counter is not suitable for
measuring the driving hours of the driver.
Use equipment which is suitable for this
purpose.
X
If Oil level low Oil level low or Oil level too low Oil level too low
is displayed in the menu window, immedi-
ately top up the amount of oil displayed
(
Y
page 163) and call up the oil level again.
i
If the oil level is too low, do not start the
engine.
X
If the oil level display is not available, repeat
the oil level check.
X
If it is not possible to display the oil level
after repeated attempts, have the oil level
display checked at a qualified specialist
workshop.
Coolant menu window
X
Use the u or t button to scroll to ã
monitoring info.
X
To display the coolant temperature: use
the r or s button to scroll to the
Coolant Coolant menu window.
i
If the coolant level is too low, the coolant
temperature cannot be displayed.
Events menu window
You can display stored malfunctions and mes-
sages in the Events Events menu. If you have recti-
fied the cause of the malfunction/message,
the on-board computer no longer displays the
event.
X
Use the u or t button to scroll to ã
monitoring info.
X
Use the r or s button to scroll to the
Events Events menu window.
The menu window shows, for example, the
number of events.
X
To display an event: press 9 .
X
To display further events: use the r or
s button to show the next event win-
dow.
Diagnostics menu window
Diagnostics data contains information with
which you can assist the workshop staff during
fault diagnosis, e.g. via roadside assistance.
The Diagnosis Diagnosis menu window contains, for
example, a list of all control units (systems)
installed in the vehicle. You can obtain further
information from any Freightliner service cen-
ter.
X
Use the u or t button to scroll to ã
monitoring info.
X
Use the r or s button to scroll to the
Diagnosis Diagnosis menu window.
X
To display diagnostics data: press 9 .
The input window shows a list of all control
unit system abbreviations.
80
On-board computer
On-bo
ard
computer
and
displays