Freggia WDBIE1485, Manual, Page: 8 / 28

8
WASHING GUIDE
• DETERGENT DRAWER:
1 Prewash
Softener
2 Washing
WASHING GUIDE
• CONTROL PANEL:
A LCD Display
B Delayed start / Keylock
C Spin button
D Prewash/disinfection button
E Turbo button
F Rinse button
G Dry button
H Start/pause button
I Program selector knob
WASH IN THE CORRECT WAY
Before attempting to operate the washing machine, ensure that the installation has been performed correctly, as described
in the instruction booklet.
• DAILY USE
1. Before placing the washing in the washing machine, make sure that there are no hard pointed objects in the pock-
ets (nails, screws, coins, pins, stones, etc.) as these can damage both the clothing and the applianace.
2. To improve the performance of the wash, place the washing loosely in the drum without compressing it. Do not
overload the machine. A full load of particularly absorbent material such as bathrobes and towelling can unbal-
ance the washing machine during the spin phase.
The automatic load-balancing system distributes the washing as evenly as possible and automatically sets the
best spin speed to reduce vibrations to a minimum.
3. Close the door, making sure that no washing has become trapped between the door and the gasket.
4. Place the correct amount of detergent in the appropriate dispenser 2 . When using a liquid detergent, insert the
partition supplied. If the Prewash function is required, add detergent to compartment 1 . Add softener to the com-
partment marked with the symbol . After adding the detergent, gently close the detergent drawer.
5. Use knob I to select a wash programme suitable for the type of fabric, following the instructions reported in the
Programme Table. The LCD will display the duration of the selected programme and the maximum load. The re-
maining time may vary during the course of the wash programme in accordance with the load in the drum. At the
end of the cycle, the word
End will appear on the display.
6. The spin speed automatically selected by the programme can be changed by pressing button C . Button B is used
to delay the start of the wash cycle by up to 19 hours. Both values appear on the LCD display.
7. Buttons D , E , F and G are used to select the extra functions. The options selected appear on the LCD display. The
duration of the wash cycle varies according to which options have been selected.
8. To start the wash cycle, press the Start button H . The LCD will display the duration of the cycle and the maximum
load. The Easy Logic system updates the remaining cycle time in accordance with the actual load in the drum.
9. At the end of the wash cycle, the word End will appear on the display. Place knob I in the Stop position and open
the door to remove the washing.
10. The washing machine can be reset at any time by placing knob I in the Stop position.
A F D G C B E H I