Freggia HCFI32B, User Manual

Page: 12 / 64

12
WHAT TO DO IN CASE OF A PROBLEM
• WHEN THE SYMBOL [ E 4 ] APPEARS :
I) The table must be reconfi gured. Please implement the following steps:
Important : before you start:
• make sure there is no more pot on the hob
• take a pot with a ferromagnetic bottom and a minimum diameter of 16 cm
• disconnect the appliance from the grid by removing the fuse or turning the circuit breaker off
• start the procedure within 2 minutes after reconnecting the hob to the grid
• reconnect the table to the grid
• don’t use the [ 0/I ] touch
II) First step : cancel the existing confi guration
1) Press [ - ] and hold down
2) With your other hand, press successively and quickly (less than
2s) on each [ O ] key. Press 2 times each key in the following order
(a -> a -> b -> b). [ - ] appears on displays. A double «beep» means
an error occurred. If so, start again from item 1).
3) Remove your fi ngers from the touch control, press simultaneously
[ + ] and [ - ] during few seconds, until blinking [ E ] symbols
appear.
4) Wait until [ E ] symbols stop blinking.
5) After few seconds, [ E ] are automatically transformed in [ C ]. The existing setup has been cancelled.
III) Second step: new setup
1) Take a ferromagnetical pot with a minimum diameter of 16 cm
2) Select a cooking zone by pushing on the corresponding [ O ] key
3) Place the pot on the area to be set
4) Wait until the [ C ] display becomes a [ - ]. The selected zone is now confi gured.
5) Follow the same procedure for each cooking zone with a [ C ] display.
6) All the cooking zones are confi gured once all the displays are turned off . Please use the same pot for the
whole procedure. Never put several pots together on the zones during the setup-process.
• If [ E 4 ] displaying remains, please call the customer care
• THE HOB OR THE COOKING ZONE DOESN’T START-UP :
• The hob is badly connected on the electrical network.
• The protection fuse cut-off .
• The locking function is activated.
• The sensitive keys are covered with grease or water.
• An object is put on a key.
• THE CONTROL PANEL DISPLAYS [ U ] :
• There is no pan on the cooking zone.
• The pan is not compatible with induction.
• The bottom diameter of the pan is too small.
• THE CONTROL PANEL DISPLAYS OR [ E ] :
• Disconnect and replug the hob.
• Call the After-sales Service.
WHAT TO DO IN CASE OF A PROBLEM