25
Step 3
Use the washers and locking nuts supplied with the mounting template to install the Boost Charger.
Insert a flat washer, then thread a locking nut onto each of the eight mounting bolts to secure the
unit.
Step 4
Ensure you have room to maneuver around the Boost Charger.
Step 5
Tighten the outer 4 nuts first. Then tighten the center front and back nuts by hand-turning the lower
nuts until they are flush against the Boost Charger frame. Finally, tighten each nut using the torque
wrench to 100 ft lbs.
Step 6
Carefully re-install the front and backside kick panels and hardware previously removed during the
uncrating process.
2
INSTALLATION OF THE BOOST CHARGER
