Install Aileron pushrod
A-
B-
C-
Servo
Elevator pushrod
Elevator horn
A
B
C
A-
B-
C-
D-
Servo
Main wing pushrod
Aileron horn
Main wing servo trough
Accessories Description
Install Elevator pushrod
Install Rudder pushrod
1.Use servo tester or radio to
center the servo.
2.Use glue to install the servo
and aileron horn on the main
wing.
3.Buckle the servo cable to the
through, after installed all the
servos, stick on the decal.
4.One side pushrod insert to the
servo arm,adjust its length.
And insert the clevis to the
aileron horn.
5.Repeat the above four steps,
install the other side main wing
servo and flap servo.
1.Use servo tester or radio to
center the servo.
2.Use glue to install the servo
and aileron horn on the
elevator.
3.Buckle the servo cable to the
through, after installed all the
servos, stick on the decal.
4.One side pushrod insert to the
servo arm,adjust its length.
And insert the clevis to the
aileron horn.
5.Repeat the above four steps,
install the other side main wing
servo and flap servo.
1.Use servo tester or radio to
center the servo.
2.Use glue to install the servo
and aileron horn on the
Rudder.
3.Buckle the servo cable to the
through, after installed all the
servos, stick on the decal.
4.One side pushrod insert to the
servo arm,adjust its length.
And insert the clevis to the
aileron horn.
5.Repeat the above four steps,
install the other side main wing
servo and flap servo.
A-
B-
C-
Servo
Rudder pushrod
Rudder horn
Note:
：
There is a EPO glue on
package, Please use it to glue.
Glue should be spread evenly
and wait for 90 seconds.Then
install on, its best glue condition.
A
B
C
D
13
A-10 Thunderbolt II
Item No.:FJ311
