Slat Assembly
D2
D - Screw
A- Slat pushrod
B - Metal pin
C - E-clip
E - Slat controller
1.Use "Metal pin(B)" and "E-clip(C)" to attach
one side of the slat pushrod to the slat
controller, use "Screw(D)" to attach the other
side to the plastic slat.
1.Use
"
Slat connection ar
m
(B)
"
to connect
"
Slat
(C)
"
to
"
Slat plastic hard point (D)
"
.
2. Use
"P
lastic pins(A)
"
to attach all parts.
A- Plastic pins
B - Slat connection arm
C- Slat
D - Slat plastic hard point
&
Attention:Slat assembly has 6 pieces.
Please refer to the letter in the plastic to
distinguish: L and R refer to the Left and
Right main wing, Figures 1-3 mean the
direction from wing root to wingtip.
Attention:
After inserting the plastic pin, melt the other
side using a hot tip such as a soldering iron.
Attention:
The slat controller has a left and
right side, please distinguish between the two
1.Use the screws and glue to attach
the assembled slat sets.
2.Use glue to attach the blister cover to
keep the surface clean.
Nose Gear Assembl
y
Assemble/disassemble the nose gear
by referring to the following diagrams.
Step 1
T-45 Goshawk
Item No.: FJ307
Version No.: FJ307-V01
K�
Step2
Accessories name and specifications
A - Electronic retract
B - E-clip
(02.0mm)
C -Retract pin
D -Steering tiller arm
E -Steering rod ring
F -Steering rod
G-Screw
(M3x3mm)
H -Spring
I -Screw
(PM2x4mm)
J -Main gear strut
K -Shock absorbing rod
L - Connecting arm 1
M -Screw
(M3x5.2mm)
N -Grub screw
(M4x4mm)
0 - Nose wheel axle
P -Wheel
(045115mm)
Q -Washer
R - Connect ing arm 2
S -Screw
(PA2x8mm)
T -Plastic retract rod
U -Plastic launching hook
V -Shock absorber supporting rod 2
W -Shock absorber supporting rod 1
x -Pin
Y -Pin
Z - Pin
AA -Pin
AB -Collar
AC -LED landing light
x·� "'---'"'"--''
y
u-
►
>3
-
:
--
�
�-
s
y
Step 3
Step4
-7-
Screws
(
PB2. 6x6mm 16pcs
)
Refer to the photo on the right
