999076
– Revision A
P a g e
|
11 of 28
3.3.2
Head Rail and Foot Rail
The Assembly of the Head Rail and Foot Rail are identical, follow the instructions below
for both components.
A.
Loosen the Star Handles on either side of the Head/Foot Rail attachment slots,
which are already positioned in the Support Frame. There is no need to fully
remove the Star Handles, see figure 9.
B.
Slide the Head/Foot Rail into the slots, ensure the rail is correctly orientated,
with the rail facing upward as shown in figure 10.
C.
Tighten the Star Handles to secure the Rails. The rail position can be adjusted
to preference. (Figure 11)
3.3.3
Final Assembly
A.
Close the Side Rails to position the Liner on the Support Frame tidily as shown
in figure 12. To close the side rails, refer to section 4.5.1.
B.
To complete the assembly, attach the buttons at each corner of the liner for a
perfect fit. (Figure 13)
Figure 9
Figure 10
Figure 11
Figure 12
Figure 13
